Shreeji Enterprise

• High load bearing capacity
• Easy to handle
• Low maintenance
• 1220x685 mm

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

• Hand Pallet Truck – Efficient Material Handling Made Easy

  The Hand Pallet Truck is a robust and reliable solution designed for efficient lifting and transportation of palletized goods in warehouses, factories, retail spaces, and distribution centers. Built with durability and ease of use in mind, this pallet truck ensures smooth operation and safe handling of heavy loads.

  Key Features:

  • Heavy-Duty Construction: Made from high-quality steel for strength and long-lasting performance.

  • Load Capacity: Supports weights typically ranging from 2,000 kg to 3,000 kg, depending on the model.

  • Easy Maneuverability: Equipped with ergonomic handles and smooth-rolling polyurethane or nylon wheels for effortless movement, even in tight spaces.

  • Precise Hydraulic Pump: Enables quick and efficient lifting of pallets with minimal effort.

  • Fork Design: Slim and tapered forks allow easy insertion under pallets and reduce floor damage.

  • Low Maintenance: Durable components and corrosion-resistant finish ensure longevity and reliability.

  Applications:
  Ideal for warehouses, manufacturing plants, logistics, retail, and any environment requiring safe and efficient movement of palletized goods.

  Benefits:

   

  • Reduces physical strain and enhances workplace safety.

  • Improves operational efficiency by enabling faster loading and unloading.

  • Compatible with standard pallets for versatile use.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

a)  Length of fork         : 1150 mm

(b)  Width of Fork        : 550   mm

(c)  Minimum  Height  : 90     mm

(d)  Maximum Height  :  200   mm

(e)  Wheels                    : 2 nos. 180 X 50 mm & 4 nos. 82 mm dia X 70 mm Heavy duty

                                        White Nylon wheels with double ball bearing

(f) Structure                  : Fork made from Heavy duty M.S. Sheet & C.I. Bracket suitable for 

                                        Roller wheels.

(g) Hydraulic Unit        : Hand operated hyd. Pump & inclined pump cylinder  having   

                                         piston duly hard chrome plated.

(h)  Handle                    :  Designed For Best Maneuverability & Made Of M.S. pipe

     handle at rear end.  ……..  

• A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

  Key Features:
  • Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
  • Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
  • Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
  • Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.
  How It Works:
  1. Positioning: The forks are slid under the pallet.
  2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
  3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
  4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.
  Applications:
  • Warehouses: For moving goods stored on pallets.
  • Retail: Often used in stockrooms to transport large volumes of items.
  • Shipping: For loading and unloading goods from trucks or containers.
  Types:
  • Standard Hand Pallet Truck: The basic, most common version used in warehouses.
  • High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
  • Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

  Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

Hand operated hyd. Pump Made from S.S. 304 & inclined pump cylinder  having piston duly hard chrome plated.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

Hand Pallet Truck – Efficient Material Handling Made Easy

The Hand Pallet Truck is a robust and reliable solution designed for efficient lifting and transportation of palletized goods in warehouses, factories, retail spaces, and distribution centers. Built with durability and ease of use in mind, this pallet truck ensures smooth operation and safe handling of heavy loads.

Key Features:

• Heavy-Duty Construction: Made from high-quality steel for strength and long-lasting performance.

• Load Capacity: Supports weights typically ranging from 2,000 kg to 3,000 kg, depending on the model.

• Easy Maneuverability: Equipped with ergonomic handles and smooth-rolling polyurethane or nylon wheels for effortless movement, even in tight spaces.

• Precise Hydraulic Pump: Enables quick and efficient lifting of pallets with minimal effort.

• Fork Design: Slim and tapered forks allow easy insertion under pallets and reduce floor damage.

• Low Maintenance: Durable components and corrosion-resistant finish ensure longevity and reliability.

Applications:
Ideal for warehouses, manufacturing plants, logistics, retail, and any environment requiring safe and efficient movement of palletized goods.

Benefits:

• Reduces physical strain and enhances workplace safety.

• Improves operational efficiency by enabling faster loading and unloading.

• Compatible with standard pallets for versatile use.

Shreeji semi electric pallet truck a very good alternative for hand pallet truck for more efficient, smooth and cost saving operations. Standard equipped with 10 Ah lithium-ion battery with chassis. The semi electric pallet truck is the most reasonable, simplest and most effective solution for warehouse applications where hand pallet trucks are used.

A weighing scale pallet truck is a combination of a pallet truck (also known as a pallet jack) and an integrated weighing scale. It is a material handling tool used in warehouses, factories, and distribution centers to move heavy loads (typically pallets) while simultaneously weighing them. This type of truck is designed to improve the efficiency of operations by allowing the operator to lift and move goods while also weighing them on the spot.

1. Pallet Jack Functionality: The truck has forks that can be lifted and lowered to move pallets, just like a standard pallet jack.
2. Integrated Scale: The weighing scale is built into the pallet truck, often in the form of a digital display and sensors in the truck's frame that measure the load's weight.
3. Digital Display: The weight of the load is displayed on a screen, often mounted on the handle for easy visibility during use.
4. Load Capacity: These trucks typically come with load capacities ranging from around 2,000 to 5,500 pounds (900 to 2,500 kg), depending on the model.
5. Accuracy: The scale is designed to provide highly accurate measurements, often with a tolerance range of +/- 1% or better.
6. Convenience: These trucks are commonly used to reduce the need for a separate weighing scale, especially in environments where heavy and bulky loads need to be handled frequently.
7. Portable: Since it’s a mobile device, it is easier to transport goods and measure their weight without needing to move them to a stationary scale.

• Warehouses: To quickly weigh pallets before shipping or storage.
• Distribution Centers: For determining shipping costs based on weight.
• Manufacturing: To monitor weights during production or quality control processes.
• Logistics: To optimize inventory management and ensure compliance with weight limits.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

Hand Pallet Truck – Efficient Material Handling Made Easy

The Hand Pallet Truck is a robust and reliable solution designed for efficient lifting and transportation of palletized goods in warehouses, factories, retail spaces, and distribution centers. Built with durability and ease of use in mind, this pallet truck ensures smooth operation and safe handling of heavy loads.

Key Features:

• Heavy-Duty Construction: Made from high-quality steel for strength and long-lasting performance.

• Load Capacity: Supports weights typically ranging from 2,000 kg to 3,000 kg, depending on the model.

• Easy Maneuverability: Equipped with ergonomic handles and smooth-rolling polyurethane or nylon wheels for effortless movement, even in tight spaces.

• Precise Hydraulic Pump: Enables quick and efficient lifting of pallets with minimal effort.

• Fork Design: Slim and tapered forks allow easy insertion under pallets and reduce floor damage.

• Low Maintenance: Durable components and corrosion-resistant finish ensure longevity and reliability.

Applications:
Ideal for warehouses, manufacturing plants, logistics, retail, and any environment requiring safe and efficient movement of palletized goods.

Benefits:

• Reduces physical strain and enhances workplace safety.

• Improves operational efficiency by enabling faster loading and unloading.

• Compatible with standard pallets for versatile use.

• High load bearing capacity
• Low maintenance
• Easy to handle
• 1150x550mm
• 2.5 ton

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

• High load bearing capacity
• Low maintenance
• Easy to handle
• capacity 2.5 ton

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

• Effortless Operation: Eliminates manual pushing and pulling, with electric motors for lifting and driving.
• Cost-Effective: A budget-friendly upgrade from manual jacks, increasing productivity without high investment.
• Versatile: Suitable for retail, manufacturing, and warehouses for light to medium loads.
• User-Friendly: Simple controls, often with butterfly switches for driving, and ergonomic designs.
• Improved Safety: Features like electric brakes and variable speeds enhance safety, even on slopes.
• Battery Options: Can use lead-acid or lithium-ion batteries, with lithium offering longer life and faster charging.

Walkie Type Fully Drive Pallet Truck is designed for fast, smooth and safe material handling inside warehouses, factories and logistics hubs. This electric pallet truck reduces manual effort, increases productivity and ensures safe movement of heavy loads with minimum operator fatigue.

Powered by a reliable electric drive system, it is ideal for short-distance travel, loading/unloading, and pallet transfer operations.

✔ Heavy-duty construction
✔ Easy walk-behind operation
✔ Low maintenance & energy efficient
✔ Safe braking and ergonomic controls

• Fully electric drive
• Walk-behind control handle
• Compact turning radius
• Strong steel chassis design
• Long-lasting battery
• Smooth lifting & travel control
• Emergency stop & safety features

• Load Capacity: 1500–2500 kg
• Lift Height: 200 mm (approx.)
• Battery Type: Lead-acid / Lithium (optional)
• Suitable for warehouses, industries, logistics & godowns

A paper beam pallet truck is a type of material handling equipment designed for lifting and transporting pallets in environments where lightweight, flexible, and strong solutions are required, such as in paper, cardboard, or packaging industries. It often has specific features that make it well-suited for handling paper beams, which can be large rolls or stacks of paper.

Here are some key features and uses of a paper beam pallet truck:

1. Lightweight Design: The truck is designed to handle lightweight products but in large quantities or dimensions (like paper rolls or beams). This reduces strain on the workers while still ensuring that the pallet truck can move heavy loads.

2. Enhanced Maneuverability: Often, paper beam pallet trucks are designed with excellent maneuverability to navigate tight spaces, such as storage areas in paper mills or warehouses.

3. Wide Forks or Special Attachments: These trucks may have specially designed forks or extensions to properly support paper beams or large rolls of paper. They are built to distribute the weight evenly to prevent damage.

4. Load Capacity: They are equipped to handle heavy loads (usually ranging from 1,000 kg to 2,500 kg) depending on the specific model, allowing them to safely transport paper rolls or beams without overloading.

5. Non-Marking Wheels: Since they are often used in environments with clean floors, such as warehouses or production areas, paper beam pallet trucks commonly have non-marking wheels that protect floors from scuffing.

Walkie Type Fully Drive Pallet Truck is designed for fast, smooth and safe material handling inside warehouses, factories and logistics hubs. This electric pallet truck reduces manual effort, increases productivity and ensures safe movement of heavy loads with minimum operator fatigue.

Powered by a reliable electric drive system, it is ideal for short-distance travel, loading/unloading, and pallet transfer operations.

✔ Heavy-duty construction
✔ Easy walk-behind operation
✔ Low maintenance & energy efficient
✔ Safe braking and ergonomic controls

• Fully electric drive
• Walk-behind control handle
• Compact turning radius
• Strong steel chassis design
• Long-lasting battery
• Smooth lifting & travel control
• Emergency stop & safety features

• Load Capacity: 1500–2500 kg
• Lift Height: 200 mm (approx.)
• Battery Type: Lead-acid / Lithium (optional)
• Suitable for warehouses, industries, logistics & godowns

• High load bearing capacity
• Low maintenance
• Easy to handle
• capacity : 2.5 ton

• A paper beam pallet truck is a type of material handling equipment designed for lifting and transporting pallets in environments where lightweight, flexible, and strong solutions are required, such as in paper, cardboard, or packaging industries. It often has specific features that make it well-suited for handling paper beams, which can be large rolls or stacks of paper.

  Here are some key features and uses of a paper beam pallet truck:

  1. Lightweight Design: The truck is designed to handle lightweight products but in large quantities or dimensions (like paper rolls or beams). This reduces strain on the workers while still ensuring that the pallet truck can move heavy loads.

  2. Enhanced Maneuverability: Often, paper beam pallet trucks are designed with excellent maneuverability to navigate tight spaces, such as storage areas in paper mills or warehouses.

  3. Wide Forks or Special Attachments: These trucks may have specially designed forks or extensions to properly support paper beams or large rolls of paper. They are built to distribute the weight evenly to prevent damage.

  4. Load Capacity: They are equipped to handle heavy loads (usually ranging from 1,000 kg to 2,500 kg) depending on the specific model, allowing them to safely transport paper rolls or beams without overloading.

  5. Non-Marking Wheels: Since they are often used in environments with clean floors, such as warehouses or production areas, paper beam pallet trucks commonly have non-marking wheels that protect floors from scuffing.

A paper beam pallet truck is a type of material handling equipment designed for lifting and transporting pallets in environments where lightweight, flexible, and strong solutions are required, such as in paper, cardboard, or packaging industries. It often has specific features that make it well-suited for handling paper beams, which can be large rolls or stacks of paper.

Here are some key features and uses of a paper beam pallet truck:

1. Lightweight Design: The truck is designed to handle lightweight products but in large quantities or dimensions (like paper rolls or beams). This reduces strain on the workers while still ensuring that the pallet truck can move heavy loads.

2. Enhanced Maneuverability: Often, paper beam pallet trucks are designed with excellent maneuverability to navigate tight spaces, such as storage areas in paper mills or warehouses.

3. Wide Forks or Special Attachments: These trucks may have specially designed forks or extensions to properly support paper beams or large rolls of paper. They are built to distribute the weight evenly to prevent damage.

4. Load Capacity: They are equipped to handle heavy loads (usually ranging from 1,000 kg to 2,500 kg) depending on the specific model, allowing them to safely transport paper rolls or beams without overloading.

5. Non-Marking Wheels: Since they are often used in environments with clean floors, such as warehouses or production areas, paper beam pallet trucks commonly have non-marking wheels that protect floors from scuffing.

• Capacity: From 2.5 Ton To 5.0 Ton.
• Size: As per Clients Requirement.
• Width: Upto : 1000 mm

Walkie Type Fully Drive Pallet Truck is designed for fast, smooth and safe material handling inside warehouses, factories and logistics hubs. This electric pallet truck reduces manual effort, increases productivity and ensures safe movement of heavy loads with minimum operator fatigue.

Powered by a reliable electric drive system, it is ideal for short-distance travel, loading/unloading, and pallet transfer operations.

✔ Heavy-duty construction
✔ Easy walk-behind operation
✔ Low maintenance & energy efficient
✔ Safe braking and ergonomic controls

• Fully electric drive
• Walk-behind control handle
• Compact turning radius
• Strong steel chassis design
• Long-lasting battery
• Smooth lifting & travel control
• Emergency stop & safety features

• Load Capacity: 1500–2500 kg
• Lift Height: 200 mm (approx.)
• Battery Type: Lead-acid / Lithium (optional)
• Suitable for warehouses, industries, logistics & godowns

A weighing scale pallet truck is a combination of a pallet truck (also known as a pallet jack) and an integrated weighing scale. It is a material handling tool used in warehouses, factories, and distribution centers to move heavy loads (typically pallets) while simultaneously weighing them. This type of truck is designed to improve the efficiency of operations by allowing the operator to lift and move goods while also weighing them on the spot.

1. Pallet Jack Functionality: The truck has forks that can be lifted and lowered to move pallets, just like a standard pallet jack.
2. Integrated Scale: The weighing scale is built into the pallet truck, often in the form of a digital display and sensors in the truck's frame that measure the load's weight.
3. Digital Display: The weight of the load is displayed on a screen, often mounted on the handle for easy visibility during use.
4. Load Capacity: These trucks typically come with load capacities ranging from around 2,000 to 5,500 pounds (900 to 2,500 kg), depending on the model.
5. Accuracy: The scale is designed to provide highly accurate measurements, often with a tolerance range of +/- 1% or better.
6. Convenience: These trucks are commonly used to reduce the need for a separate weighing scale, especially in environments where heavy and bulky loads need to be handled frequently.
7. Portable: Since it’s a mobile device, it is easier to transport goods and measure their weight without needing to move them to a stationary scale.

• Warehouses: To quickly weigh pallets before shipping or storage.
• Distribution Centers: For determining shipping costs based on weight.
• Manufacturing: To monitor weights during production or quality control processes.
• Logistics: To optimize inventory management and ensure compliance with weight limits.

A weighing scale pallet truck is a combination of a pallet truck (also known as a pallet jack) and an integrated weighing scale. It is a material handling tool used in warehouses, factories, and distribution centers to move heavy loads (typically pallets) while simultaneously weighing them. This type of truck is designed to improve the efficiency of operations by allowing the operator to lift and move goods while also weighing them on the spot.

1. Pallet Jack Functionality: The truck has forks that can be lifted and lowered to move pallets, just like a standard pallet jack.
2. Integrated Scale: The weighing scale is built into the pallet truck, often in the form of a digital display and sensors in the truck's frame that measure the load's weight.
3. Digital Display: The weight of the load is displayed on a screen, often mounted on the handle for easy visibility during use.
4. Load Capacity: These trucks typically come with load capacities ranging from around 2,000 to 5,500 pounds (900 to 2,500 kg), depending on the model.
5. Accuracy: The scale is designed to provide highly accurate measurements, often with a tolerance range of +/- 1% or better.
6. Convenience: These trucks are commonly used to reduce the need for a separate weighing scale, especially in environments where heavy and bulky loads need to be handled frequently.
7. Portable: Since it’s a mobile device, it is easier to transport goods and measure their weight without needing to move them to a stationary scale.

• Warehouses: To quickly weigh pallets before shipping or storage.
• Distribution Centers: For determining shipping costs based on weight.
• Manufacturing: To monitor weights during production or quality control processes.
• Logistics: To optimize inventory management and ensure compliance with weight limits.

• A high lift hand pallet truck is a type of manual material handling equipment used to lift and move pallets in warehouses or industrial environments. It is similar to a standard hand pallet truck (also known as a pallet jack), but with the added capability of lifting the load to a higher height.

  Key Features:

  1. Height Adjustment: High lift hand pallet trucks can lift pallets to a higher level, typically ranging from 5 to 10 inches or more, depending on the model. This makes them suitable for loading and unloading trucks or placing items on shelves without needing additional equipment.

  2. Manual Operation: These pallet trucks are usually operated manually, with the user pumping a handle to raise the forks. The lifting mechanism is typically powered by hydraulics, which is activated by a handle or lever.

  3. Fork Design: The forks are usually wider and adjustable, allowing for different pallet sizes and more versatility.

  4. Load Capacity: They typically have load capacities ranging from 1,000 to 5,000 pounds (or more), depending on the design and the specific model.

  5. Wheels: High lift hand pallet trucks are equipped with heavy-duty wheels that allow them to move easily even when fully loaded.

  Applications:
  • Loading and Unloading: They help in the loading and unloading of goods from trucks or containers, especially when dealing with heavy loads.
  • Stacking: They can also be used to stack pallets on top of each other or place them at different heights in shelving or storage systems.
  • Handling Loads in Tight Spaces: Since they are manual and compact, they are perfect for working in narrow aisles or spaces with limited clearance.
  Benefits:
  • Cost-Effective: Unlike electric or powered forklifts, high lift hand pallet trucks are affordable and require little maintenance.
  • Flexible: They are useful in a wide range of industries like warehousing, manufacturing, and retail.
  • Ease of Use: With simple mechanics and no need for complex training, most operators can quickly learn how to use them.

• Operator Position: The operator walks behind the truck, guiding it with a long tiller handle.
• Power Source: Battery-operated (often rechargeable), providing smooth electric movement.
• Functionality: Lifts, lowers, and transports loads, reducing manual strain.
• Controls: Intuitive controls on the handle for speed, lift, and lower functions.
• Design: Compact and robust for maneuverability in tight spaces. 

• Pallet Jack (or Pallet Truck): Moves pallets horizontally; forks go under the pallet.
• Pallet Stacker: Similar to a pallet jack but includes a mast to lift pallets higher, often for stacking.
• Walkie Rider: A variation where the operator stands on an integrated platform for longer distances. 

• Reduced Fatigue: Less physical effort compared to manual jacks.
• Increased Productivity: Faster and smoother movement of goods.
• Versatility: Suitable for loading/unloading, short travel, and staging areas.
• Safety: Modern models have advanced safety features like emergency stops. 

A paper beam pallet truck is a type of material handling equipment designed for lifting and transporting pallets in environments where lightweight, flexible, and strong solutions are required, such as in paper, cardboard, or packaging industries. It often has specific features that make it well-suited for handling paper beams, which can be large rolls or stacks of paper.

Here are some key features and uses of a paper beam pallet truck:

1. Lightweight Design: The truck is designed to handle lightweight products but in large quantities or dimensions (like paper rolls or beams). This reduces strain on the workers while still ensuring that the pallet truck can move heavy loads.

2. Enhanced Maneuverability: Often, paper beam pallet trucks are designed with excellent maneuverability to navigate tight spaces, such as storage areas in paper mills or warehouses.

3. Wide Forks or Special Attachments: These trucks may have specially designed forks or extensions to properly support paper beams or large rolls of paper. They are built to distribute the weight evenly to prevent damage.

4. Load Capacity: They are equipped to handle heavy loads (usually ranging from 1,000 kg to 2,500 kg) depending on the specific model, allowing them to safely transport paper rolls or beams without overloading.

5. Non-Marking Wheels: Since they are often used in environments with clean floors, such as warehouses or production areas, paper beam pallet trucks commonly have non-marking wheels that protect floors from scuffing.

A weighing scale pallet truck is a combination of a pallet truck (also known as a pallet jack) and an integrated weighing scale. It is a material handling tool used in warehouses, factories, and distribution centers to move heavy loads (typically pallets) while simultaneously weighing them. This type of truck is designed to improve the efficiency of operations by allowing the operator to lift and move goods while also weighing them on the spot.

1. Pallet Jack Functionality: The truck has forks that can be lifted and lowered to move pallets, just like a standard pallet jack.
2. Integrated Scale: The weighing scale is built into the pallet truck, often in the form of a digital display and sensors in the truck's frame that measure the load's weight.
3. Digital Display: The weight of the load is displayed on a screen, often mounted on the handle for easy visibility during use.
4. Load Capacity: These trucks typically come with load capacities ranging from around 2,000 to 5,500 pounds (900 to 2,500 kg), depending on the model.
5. Accuracy: The scale is designed to provide highly accurate measurements, often with a tolerance range of +/- 1% or better.
6. Convenience: These trucks are commonly used to reduce the need for a separate weighing scale, especially in environments where heavy and bulky loads need to be handled frequently.
7. Portable: Since it’s a mobile device, it is easier to transport goods and measure their weight without needing to move them to a stationary scale.

• Warehouses: To quickly weigh pallets before shipping or storage.
• Distribution Centers: For determining shipping costs based on weight.
• Manufacturing: To monitor weights during production or quality control processes.
• Logistics: To optimize inventory management and ensure compliance with weight limits.

A high lift hand pallet truck is a type of manual material handling equipment used to lift and move pallets in warehouses or industrial environments. It is similar to a standard hand pallet truck (also known as a pallet jack), but with the added capability of lifting the load to a higher height.

1. Height Adjustment: High lift hand pallet trucks can lift pallets to a higher level, typically ranging from 5 to 10 inches or more, depending on the model. This makes them suitable for loading and unloading trucks or placing items on shelves without needing additional equipment.

2. Manual Operation: These pallet trucks are usually operated manually, with the user pumping a handle to raise the forks. The lifting mechanism is typically powered by hydraulics, which is activated by a handle or lever.

3. Fork Design: The forks are usually wider and adjustable, allowing for different pallet sizes and more versatility.

4. Load Capacity: They typically have load capacities ranging from 1,000 to 5,000 pounds (or more), depending on the design and the specific model.

5. Wheels: High lift hand pallet trucks are equipped with heavy-duty wheels that allow them to move easily even when fully loaded.

• Loading and Unloading: They help in the loading and unloading of goods from trucks or containers, especially when dealing with heavy loads.
• Stacking: They can also be used to stack pallets on top of each other or place them at different heights in shelving or storage systems.
• Handling Loads in Tight Spaces: Since they are manual and compact, they are perfect for working in narrow aisles or spaces with limited clearance.

• Cost-Effective: Unlike electric or powered forklifts, high lift hand pallet trucks are affordable and require little maintenance.
• Flexible: They are useful in a wide range of industries like warehousing, manufacturing, and retail.
• Ease of Use: With simple mechanics and no need for complex training, most operators can quickly learn how to use them.

• A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

  Key Features:
  • Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
  • Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
  • Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
  • Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.
  How It Works:
  1. Positioning: The forks are slid under the pallet.
  2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
  3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
  4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.
  Applications:
  • Warehouses: For moving goods stored on pallets.
  • Retail: Often used in stockrooms to transport large volumes of items.
  • Shipping: For loading and unloading goods from trucks or containers.
  Types:
  • Standard Hand Pallet Truck: The basic, most common version used in warehouses.
  • High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
  • Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

  Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

A paper beam pallet truck is a type of material handling equipment designed for lifting and transporting pallets in environments where lightweight, flexible, and strong solutions are required, such as in paper, cardboard, or packaging industries. It often has specific features that make it well-suited for handling paper beams, which can be large rolls or stacks of paper.

Here are some key features and uses of a paper beam pallet truck:

1. Lightweight Design: The truck is designed to handle lightweight products but in large quantities or dimensions (like paper rolls or beams). This reduces strain on the workers while still ensuring that the pallet truck can move heavy loads.

2. Enhanced Maneuverability: Often, paper beam pallet trucks are designed with excellent maneuverability to navigate tight spaces, such as storage areas in paper mills or warehouses.

3. Wide Forks or Special Attachments: These trucks may have specially designed forks or extensions to properly support paper beams or large rolls of paper. They are built to distribute the weight evenly to prevent damage.

4. Load Capacity: They are equipped to handle heavy loads (usually ranging from 1,000 kg to 2,500 kg) depending on the specific model, allowing them to safely transport paper rolls or beams without overloading.

5. Non-Marking Wheels: Since they are often used in environments with clean floors, such as warehouses or production areas, paper beam pallet trucks commonly have non-marking wheels that protect floors from scuffing.

A hand pallet truck (also known as a manual pallet jack) is a simple, manually operated device used for lifting and moving pallets. It consists of a set of wheels, a hydraulic lift system, and a set of forks. The primary function of the hand pallet truck is to move heavy loads over short distances, typically within warehouses, factories, and distribution centers. Here's a breakdown of its features:

• Forks: The prongs or arms of the pallet jack that slide under the pallet to lift it.
• Hydraulic System: Operates through a pump handle, which controls the lift of the forks. The system uses hydraulic force to raise and lower the load.
• Wheels: A set of wheels, typically made of rubber or polyurethane, allows the pallet truck to move with ease.
• Pump Handle: The user pumps the handle up and down to lift the forks and the load. To lower the load, a valve is released.

1. Positioning: The forks are slid under the pallet.
2. Lifting: The pump handle is used to lift the forks and the load by operating the hydraulic system.
3. Transporting: The pallet truck is then pushed or pulled to move the load to the desired location.
4. Lowering: Once the load is in place, the pump handle is used again to lower the forks and release the load.

• Warehouses: For moving goods stored on pallets.
• Retail: Often used in stockrooms to transport large volumes of items.
• Shipping: For loading and unloading goods from trucks or containers.

• Standard Hand Pallet Truck: The basic, most common version used in warehouses.
• High-Lift Pallet Truck: Offers a higher lifting range for tasks that require additional height.
• Rough Terrain Pallet Truck: Equipped with large wheels, designed for use on uneven or outdoor surfaces.

Hand pallet trucks are ideal for manual handling of palletized goods but are limited by the weight they can carry and the physical effort needed to operate them.

Stainless Steel Hand Pallet Truck – Durable, Hygienic, and Reliable

The Stainless Steel Hand Pallet Truck is specially designed for environments that demand the highest standards of hygiene and corrosion resistance, such as food processing, pharmaceuticals, chemical industries, and wet or corrosive conditions. Combining strength, durability, and stainless steel construction, it ensures safe and efficient handling of palletized loads.

Key Features:

• Stainless Steel Construction: Made from high-grade stainless steel for maximum corrosion resistance and durability. Ideal for wet, humid, or chemically sensitive environments.

• Load Capacity: Typically supports weights up to 2,000–2,500 kg, depending on the model.

• Smooth and Easy Handling: Ergonomic handle with smooth hydraulic pump for effortless lifting and maneuvering.

• Hygienic Design: Easy-to-clean surfaces prevent bacterial buildup, making it perfect for food, pharmaceutical, and cleanroom environments.

• Durable Wheels: Equipped with stainless steel or corrosion-resistant polyurethane/nylon wheels for smooth operation.

• Precise Forks: Tapered and robust forks for easy pallet insertion and safe transport.

Applications:
Ideal for food processing plants, pharmaceuticals, chemical industries, marine environments, laboratories, and any setting where corrosion resistance and hygiene are critical.

Benefits:

• Corrosion-resistant for long-lasting performance in harsh environments.

• Maintains hygiene standards in sensitive workplaces.

• Reduces manual strain and increases operational efficiency.

• Compatible with standard pallets for versatile use.

Specifications (Example):

• Load Capacity: 2,500 kg

• Fork Length: 1150 mm

• Fork Width: 550 mm

• Min/Max Fork Height: 85 / 200 mm

• Wheel Type: Polyurethane or Nylon, corrosion-resistant

• Step 1: Check for Leaks
  Inspect the hydraulic system for leaks. If the oil reservoir or any of the hydraulic lines are leaking, you’ll need to replace the damaged part (e.g., seals or hose).
• Step 2: Bleed the System
  Air in the hydraulic system can cause lifting issues. To bleed the air out, raise the pallet truck’s forks, open the release valve, and allow the truck to lower completely. Pump the handle a few times to get the air out of the system.
• Step 3: Top Off Hydraulic Fluid
  If the oil level is low, refill it with the appropriate hydraulic fluid. Make sure to use the correct type to avoid damaging the system.
  
• After all repairs, conduct a full inspection to make sure the pallet truck is functioning properly.
• Test the lifting mechanism, the maneuverability of the wheels, and ensure the hydraulic system is functioning without leaks.
• Make sure the truck is stable and all parts are securely attached before putting it back into use

HPT Warp Beam Trolley

The HPT Warp Beam Trolley is designed for safe and efficient handling, shifting, and transportation of warp beams in textile mills. It is manufactured using heavy-duty mild steel to ensure high load-bearing capacity, durability, and long service life. The trolley is equipped with strong wheels for smooth movement on mill floors and is ergonomically designed for easy operation. It helps reduce manual effort, improves productivity, and ensures safe beam handling during weaving and warping processes.

Key Features:

• Heavy-duty MS fabricated structure

• Suitable for handling warp beams

• High load-carrying capacity

• Smooth and stable movement

• Robust, durable, and low maintenance

• Ideal for textile and weaving industries